Mcon Rasayan Pvt. Ltd.

Mcon Rasayan Pvt. Ltd.

TRUSTED PARTNER IN CONSTRUCTION CHEMICALS

IGBCMM200239

IGBCMM200239

MCON Release SPL

MCON Release SPL

MCON RELEASE SPL is an emulsified blend of mineral oils and non-hazardous chemicals, specially formulated to produce release properties which are superior to those of conventional mould oil. Typical Properties Colour : White when mixed with water Form : Liquid emulsion Mixing Ratio: 1:4 or 1:5 with clean potable water Formwork Surfaces : Equally effective on wood or metal moulds and shutters. Sp. Gravity : 0.990 ± 0.005 at 30 ºC

MCON RELEASE SPL is an emulsified blend of mineral oils and non-hazardous chemicals, specially formulated to produce release properties which are superior to those of conventional mould oil. MCON RELEASE SPL is supplied as a concentrated form of water based Mould release agent which can be diluted at site. The chemically reactive components in MCON RELEASE SPL provide a water repellent interface which protects formwork and ensures an even colour and texture of the cast concrete.

Areas of Application
MCON RELEASE SPL provides quick, clean and easy stripping of moulds and formwork. MCON RELEASE SPL ensures high quality, fair-faced and stain-free concrete surface. MCON RELEASE AL is the ideal mould release agent to be used for precast factories, ply, metal and aluminium shuttering.

Advantages
Ensures good fair-faced concrete
Easy storage and transportation as supplied in concentrated form
Can be used on all type of formwork like Aluminium, Steel, Plywood.
Non-staining, with clean stripping of moulds
Minimises cleaning of shutters before re-use
Does not rust steel mould or damage aluminium moulds
Cost effective when diluted
Reduces the incidence of air pocket and tendency of surface spalling of corners.

Specification

Typical Properties

  • Colour : White when mixed with water
  • Form : Liquid emulsion
  • Mixing Ratio: 1:4 or 1:5 with clean potable water
  • Formwork Surfaces : Equally effective on wood or metal moulds and shutters.
  • Sp. Gravity : 0.990 ± 0.005 at 30 ºC,

 

Direction for use

Preparation of New Moulds : No preparation is necessary but if extensive re-use of Timber moulds is envisaged, it is advisable to protect all new surfaces with MCON RELEASE SPL. For used moulds, all traces of cement must be removed together with any surface deposits of previous oils.

Coating : MCON RELEASE SPL can be applied by brush, sponge or conventional mould oil-sprayer. If an oil-sprayer is used, care should be taken to choose correct size of sprayer. Apply one thin and even coat of MCON RELEASE SPL over the entire surface. Even a thin coat is enough to achieve effective coverage. Excess application is uneconomical and may lead to surface dusting. To remove MCON RELEASE SPL completely, for recoating mould or shutter surface, use strong industrial detergent together with stiff brushing & then thoroughly rinse with clean water

 

Coverage

1 liter of MCON RELEASE SPL covers 140 to 160 m2 per litre after mixing with water.

 

Packaging

50 ltrs., 200 ltrs. Drum

 

Storage and Shelf life

Store away from direct sunlight. 24 months from date of manufacture if stored in unopened containers when kept in dry conditions at a temperature between 5ºC to 45ºC. Storage at higher temperature or high humidity may reduce shelf life.

 

Safety precautions

MCON RELEASE SPL is toxic and non-hazardous. Remove splashes on the skin with soap & water. Avoid contact with eyes and accidental contamination should be washed thoroughly with plenty of water and medical treatment sought immediately. Ensure good ventilation and do not smoke during use.

Reviews

There are no reviews yet.

Be the first to review “MCON Release SPL”

Your email address will not be published. Required fields are marked *

Related Products

Need Help? Chat with us