Mcon Rasayan Pvt. Ltd.

Mcon Rasayan Pvt. Ltd.

TRUSTED PARTNER IN CONSTRUCTION CHEMICALS

IGBCMM200239

IGBCMM200239

MCON Elasto Coat

MCON Elasto Coat

ELASTO COAT is an exterior acrylic elastomeric coating that offers waterproofing as well as aesthetics in a single pack. It provides a complete solution to prevent dampness and seepages that spoil the expensive interiors and decorative interior paints. It is highly user friendly and eco-friendly. Features & Benefits Crack-bridging even at low temperatures (-20°C) Water vapor permeable Very good resistance against weathering and ageing. Environmentally friendly (solvent free) Reduced tendency to dirt pick up and contamination

NEW MASONRY

ELASTO COAT Elastomeric Waterproof coating should not be applied to fresh concrete and to other surfaces less than seven days old. Ideally concrete should be allowed to cure for 28 days before application. Power wash to ensure no under bound sand or cement remains on the surface. Allow the surface to dry and apply ELASTO PRIMER one coat. Let the primer get absorbed in the surface and apply ELASTO COAT after 4 hours of primer application

EXISTING MASONRY

Power wash to remove all loosely adhered coatings, dirt, mild dew and other contaminants.

Fill any existing cracks up to 3mm with MCON Crack Filler (Non Shrink Crack filler) paintable sealant. And more than 3mm with MCON Polymer Mortar (Ready to use Polymer Repair Mortar)

Features & Benefits
Crack-bridging even at low temperatures (-20°C)
Water vapor permeable
Very good resistance against weathering and ageing.
Suitable for saline environment due to anti-carbonation properties
Excellent resistance to microbial organisms like algae and fungi maintaining its aesthetic value
Environmentally friendly (solvent free)
Reduced tendency to dirt pick up and contamination.

DIRECTION FOR USE
Adequate surface preparation as given below is necessary for product performance.

Specification

Surface Preparation

New Masonry :

ELASTO COAT Elastomeric Waterproof coating should not be applied to fresh concrete and to other surfaces less than seven days old. Ideally concrete should be allowed to cure for 28 days before application. Power wash to ensure no under bound sand or cement remains on the surface. Allow the surface to dry and apply ELASTO PRIMER one coat. Let the primer get absorbed in the surface and apply ELASTO COAT after 4 hours of primer application

EXISTING MASONRY

Power wash to remove all loosely adhered coatings, dirt, mild dew and other contaminants.

Fill any existing cracks up to 3mm with MCON Crack Filler (Non Shrink Crack filler) paintable sealant. And more than 3mm with MCON Polymer Mortar (Ready to use Polymer Repair Mortar)

 

Application Of Elasto Coat

ELASTO COAT Elastomeric Waterproof Coating can be applied by brush or roller. The material is to be diluted with specified percentage of water. Dampen the surface slightly with water if the primer has been applied for more than 24 hours. Apply first coat at the spread rate of 4.0 – 4.5 m2/ltr. Allow it to dry for minimum 6 hrs. (Preferably 24 hrs.) before application of second coat. Apply second coat of ELASTO COAT at the spread rate of 4.5 – 5.0 m2/ltr. After thinning it with specified percentage of water

 

Precaution

The substrate should be free from Chalking

All dust, grease and loose paints, powdery particles, fungus and algae need to be completely removed from the walls.

Fill the existing cracks more than 3mm in size with MCON Polymer Mortar.

 

PACKING

20 kgs.

 

SHELF LIFE

12 months in original packing if stored at room temperature i.e.25

Reviews

There are no reviews yet.

Be the first to review “MCON Elasto Coat”

Your email address will not be published. Required fields are marked *

Related Products

Need Help? Chat with us