Description
Method of Application
Surface preparation
Make sure that the surface is absolutely clean, dry and free from dust, grease and foreign materials.
There should be a time gap of at least 10 days before MCON SUPER COAT application is done on newly plastered surfaces.
Ensure that the surface is fairly even
If concrete surface is to be painted, it shall be washed with a water jet at 3000 psi and all loose concrete should be getting removed and all pin holes and blow holes should get opened.
Coating Application:
Apply the ready to use mixed material with putty knife from bottom to top by ensuring complete filling of holes with putty material and featheredged finish. The coating should be about 0.5 mm thick.
Second coat of MCON SUPER COAT depends up on the exposed surface after first coat (generally both coat do not exceed 1mm) and leave the surface to dry overnight. The drying time of each coat should be 4 hours, but will vary from surface to surface.(depending upon atmospheric conditions)
Finishing: Make sure that the material has fully covered the substrate and dried. If putty applied surface is rough, surface should be made smooth by rubbing suitable emery paper on it. Ensure that the paper is fine and does not cause scratches on the MCON SUPER COAT coating area.
Painting: The smooth surface finished with MCON SUPER COAT does not require any putty or primer before paint application. Just apply any paint as per the manufacturer’s standard specification.
Features & Benefits
Synthetically bound ready to use compound for inert filler material.
Only precise quantity of water to be added.
Ensures use on all common types of building interiors
Excellent adhesion & thixotropicness
Due to good bonding property it is more durable.
Excellent finishing and easy to apply
Provides smooth, silky and featheredged finish to substrate to facilitate better texture of paint.
Application of MCON SUPER COAT (P) with workmanship makes exterior and interior look aesthetic. No curing is required.
Prevents growth of algae and fungi on walls.
It is in dry powder form and does not produce any kind of filth smell at the time of application.
