1. Corrosion protection for embedded reinforcing steel, especially from chloride attack.
2. Protection from the destructive influences of reinforcement corrosion.
3. No negative influences on the properties of both the fresh and the hardened concrete.
4. Absorbs onto the reinforcing steel to form a corrosion- resistant protective film.
5. Extended service life of reinforced concrete structures.
1. Ready Mixed Concrete
2. Industrial Plants
3. Concrete Road & Bridges
4. Internal & External Plaster
5. Bridges, highways, chlorinating plants, sewerage systems
6. Building facades and balconies
1. MCON CI 300 is mixed with the gauging water or added at the same time into the concrete mixer.
2. It may also be added to the concrete in the transit mixer at the point of discharge.
3. In this case, an additional mixing time of at least 1 minute per m³ of concrete must be observed.
4. Before discharging it, check the concrete visually for uniform consistency.
5. The quantity of MCON CI 300 in the mix design should be taken into consideration when determining the quantity of water for a specific W/C ratio. MCON CI 300 is not to be mixed with dry cement.
12 months from date of production if stored properly in undamaged and unopened, original sealed containers.
Wear hand gloves, safety shoes and safety goggles while using and handling the product. In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately. Clean small spillages immediately with water. Contain large spillages with suitable absorbent materials.
Features
Benefits
08976907887 
