Description

MCON CURE C is resin-based pigmented concrete curing compound and is formulated from hydrocarbon resins. It may be used on interior, exterior, vertical, and horizontal concrete surfaces. It is transparent non-toxic, aqueous solution which when applied to fresh concrete surfaces, reacts with free lime and seals the pores, thus reducing the evaporation of water from the mix, which assists in curing process. It is used as a curing aid for fresh concrete floors, screeds, granolithic toppings and vertical surfaces.

Areas of Application
MCON CURE C can be used in areas of poor ventilation and further treatment can be done on MCON CURE C coated surface. It is used as a curing aid for fresh concrete floors, screeds, granolithic toppings and vertical surfaces. After approximately four weeks, the membrane begins to chemically break down when exposed to UV rays. The membrane will eventually dissipate from the surface. This process is sped up by exposure to traffic and UV light, as well as weathering conditions.

Features & Benefits
Premixed, ready to use.
Can be used as a curing aid If wet curing is not possible
For larger areas of concrete surfaces which are opened to sunlight, wind etc. curing is big task. But with the presence of curing compound it is easier.
Chloride free
Eliminates water curing. Columns, beams, slabs can also be cured with curing compound
Replacement to irregular, insufficient and delayed curing.
Non toxic and inflammable.

Features & Benefits
Curing compound is applied when the finishing is completed and free water present on the surface gets disappeared.

The curing compound is applied through spraying pipe as shown in above figure with constant rate of pressure.

In small areas, we can also use brushes or paint rollers to apply curing compounds.