MCON Magic Coat 2K

1. Certified as a “potable water safe” coating for waterproofing of water tanks.

2. Low water permeability and excellent resistance to water ingress.

3. Excellent adhesion to concrete and masonry surfaces.

4. Elastomeric flexible coating that accommodates cracks up to 2 mm with an elasticity of 40–50%.

5. Forms a flexible film coating that accommodates cracks and provides better hiding on the surface.

6. Provides excellent resistance to water uptake.

7. Composed of eco-friendly materials with low VOC.

1. 6–8 sq. ft. per kg per coat

2. 80–100 sq. ft. per 15 kg pack (single coat)

1. 15 kg: Part A – 10 kg HDPE bags and Part B – 5 kg HDPE cans.

2. 3 kg: Part A – 2 kg HDPE bags and Part B – 1 kg HDPE cans.

1. Always add powder to liquid to avoid lump formation.

2. Do not cure by flooding with water.

3. Cure the membrane with moist hessian clothes.

1. Wear hand gloves, safety shoes, and safety goggles while using and handling the product.

2. If the eyes or mouth are affected, wash with plenty of clean water and seek medical treatment immediately.

1. Clean the surface with a wire brush or scrubber to remove hidden dirt, loose particles, laitance, and dust.

2. Degrease the surface using suitable solvents.

3. Repair the spalled concrete portion with MCON Polymer Mortar to a depth of at least 10 mm to avoid feather edging and provide a strong bond.

1. Shake the liquid component well before mixing.

2. Use a heavy-duty, slow-speed mechanical mixer to mix the two components.

3. Take the liquid part (whole quantity) in a bucket/drum.

4. Add the powder part slowly to the liquid part with continuous slow stirring to achieve a slurry consistency without lumps and foam.

1. The surface of application must be thoroughly pre-wetted with water and brought to a touch-dry state.

2. Apply the first coat using a stiff nylon brush.

3. Work well into the substrate to ensure that all small undulations are completely filled with the coating.

4. Three to four hours after completion of the first coat, apply the second coat in a direction perpendicular to the first.

5. Complete the application and leave it to water cure for 2 days.

6. In new bathrooms, MAGIC COAT 2K must typically be applied all over the sunken slab portion and upwards over the masonry walls to a height of 6–7 feet, i.e., over the shower splash zone, to ensure complete waterproofing.

7. MAGIC COAT 2K should be removed from tools and equipment with clean water immediately after use.

8. Hardened material can only be removed mechanically.

1. Excellent as a waterproof coating for toilets, bathrooms, kitchens, swimming pools, water reservoirs, etc.

2. Perfect waterproof coating for domestic water tanks and waterproofing for concrete slabs and terraces.

3. Retaining walls, planter boxes, and R.C. gutters.

4. Outdoor decking.