1. Elastomeric – accommodates cracks up to 2 mm with an elasticity of 100–150%.
2. Low water permeability – excellent resistance to water ingress.
3. Excellent adhesion to concrete and masonry surfaces.
4. No curing required.
5. Elastomeric UV-resistant coating.
1. The surface must be dry during application, as the material does not cure in the presence of moisture.
2. Moisture level should not be more than 0.5%.
3. Soft settling may occur in containers. Stir thoroughly and carefully to achieve a homogeneous consistency.
4. Avoid application on very hot substrates and during very hot and windy conditions.
5. Film formation may not be uniform or gradual under such conditions. Surface skinning may lead to blisters and bubbles due to vapour trapped within the material.
Coverage
0.2–0.3 kg/m² per single coat.
Packing
1, 4, 10 and 20 Ltr HDPE Buckets.
Shelf Life
12 months in original packing when stored at room temperature (25°C).
1. All surfaces to be waterproofed should be sound, clean and dry, and free from laitance, grease, oil, dirt and other loose materials.
2. Algae and fungi must be removed physically. After treatment, leave for 2–3 hours, then wash thoroughly with clean water and allow the surface to dry completely.
3. MAGIC COAT FLEXI should be applied by brush, trowel or airless spray in two coats, maintaining the spreading rate to achieve the desired DFT of 1 mm.
4. Material consumption shall be approximately 0.2–0.3 kg/m² per single coat.
1. Terrace Garden
2. Podiums
3. Foundations
4. Basements
MAGIC COAT FLEXI is a single-component, modified poly-acrylic, liquid-applied coating composed of specially developed polymers and properly selected and graded fillers. It cures by reaction with atmospheric moisture to form a tough elastomeric waterproof membrane.
No Features & Benefits content added yet.
08976907887 
