Description

Areas of Application :-

• For concrete repairs – Spalled concrete of floors, columns, beams,
  chajja, slabs, parapets, etc.
• For waterproofing – Small roof terraces, sunken portions of toilets &
  bathrooms, chajja & lift pits, balconies
• As a bond coat – For bonding of new concrete to old concrete, masonry
  stone work, plastering fixing of slip bricks, tiles, stones & marble
  bedding.
• For plastering on RCC Surface without hacking as a hacking aid.
• As external rendering – Weatherproof & frost resistant render.
• As bonding slurry coat for pinhole treatment on concrete surface.

Method of Application :-

• Surface preparation is vital for effective adhesion and bonding of BOND APL.
• To start with, free the surface from laitance, loose dust particles, oil, grease
  and other dirt.
• Then: Weigh out 1 kg of BOND APL in a plastic container of 2 litre capacity.
• Weigh out 1 kg of ordinary Portland cement from a bag of fresh cement.
• Add the cement gradually to BOND APL with constant stirring.
• Ensure ther is no formation of lumps.
• Stir constantly until all the cement has been added to BOND APL and slurry
  of uniform consistency is achieved.
• Apply this slurry on the substrate using a soft 4 – inch wide paint brush.
• Apply the slurry in one direction only