MCON Cure CC

1. Eliminates water curing. Columns, beams, slabs can also be cured with curing compound. Replacement to irregular, insufficient and delayed curing.
2. Reduces incidence of plastic cracking
3. Reduces shrinkage, surface dusting Bullet Eliminates expensive methods of curing such as hessian-watering, etc.
4. Can be used as a curing aid If wet curing is not possible
5. Does not require removal of curing layer for next application on the surface.

admin

1. Concrete Floor
2. Screeds
3. Granolithic Toppings
4. Vertical Surfaces

admin

1. MCON CURE CC White is ready to use. Do not dilute. Stir well before use.
2. Does not require removal of curing layer for next application on the surface.
3. Standards ASTM C-309 Type 1.
4. MCON CURE CC White curing compound can be applied by a sprayer, brush or paint roller. For maximum beneficial effect, it should be applied immediately after disappearance of the surface water sheen following final finishing on horizontal surfaces.
5. For vertical surfaces, apply immediately after removal of formwork.
6. Apply single coat in two applications at right angles to each other to ensure uniform and more complete coverage.
7. After application, the area must be protected from rain for at least 2-3 hours.

admin

12 months in original packing if stored at room temperature i.e. 25 C

admin

1. MCON CURE CC is non-toxic. However, splashes on the skin should be washed well with water and in contact with eye occurs, wash well with water and seek medical advice.
2. Curing compound is non-effective once the excess water from concrete is evaporated by heat of hydration.

admin

1. Protection of elements with high surface/volume
2. Ratio: Slabs, roads, concrete highway.
   
3. MCON CURE CC makes it possible to continue with subsequent activity like Painting, Tile Fixing, etc. without removing this layer
4. Protection of concrete/mortar subject to adverse.
5. Drying effects at early age (high ambient temp, wind).
6. Trowel finishing.
7. Precast Concrete.

admin

The recommended coverage rate is between 5 to 7 m2/litre. Coverage rates outside this recommended range may be used if necessary and suitable to meet specific requirements. Contact MCON office for any advice in such cases.

admin