MCON Deco Sealer

MCON DECO SEALER membrane must be allowed to cure for a minimum of 24 hours @ 27^o C before allowing next treatment or foot traffic.

mconadmin

1. Cold curing, cures to a tough, flexible and abrasion resistant coating.

2. Bonds strongly on cement concrete, stamped concrete, asbestos, stone work, cement plastered applied surfaces.

3. Anti Skid & Anti fungal – Cures to give a anti skid surface to prevent slipping of vehicles & people.

mconadmin

1. Surface to be dry for application as the material is cured in presence of moisture.

2. Moisture level shall not be essentially more than 2.0%.

3. Soft settling is likely to be observed in containers and the same shall be stirred thoroughly and carefully to achieve a homogeneous consistency.

4. Avoid application on very hot substrate during a very hot and windy conditions.

5. Film formation may not be uniform and gradual under such circumstances & skinning on top surface may lead to formation of blisters and bubbles due to entrapped vapour from within the material.

mconadmin

12 months in original packing if stored at room temperature i.e.25^o C

mconadmin

1. Parking Areas

2. Coloured & Stamped Concrete

3. Podiums

4. External Stone Work Walls

mconadmin