1. Good wear resistance rating
2. Corrosion resistant – Does not contain any ferrous aggregate, so no rusting & erosion of floor, contains metal alloys to give strength and avoid corrosion.
3. Ease of application – pre-mixed powder, easy to dry shake & trowel.
4. Increased resistance to oils and grease.
1. Shopping Malls, Parking Areas
2. Vehicle maintenance floors.
3. Loading Docks.
4. Workshops
5. Machine shops
1. The base concrete should have a minimum cement content of 300 kg/m³ with low slump of 40-60 mm. By using MCON SRP 50, workability of base concrete can be improved with a low w/c ratio.
1. The base concrete must be laid in accordance with good concrete practice either in bays or long strips. Particular care must be taken at the corners and edges of the bays to obtain good compaction and to maintain level for subsequent trowel operations. If too much of free water is seen on the surface, water content in subsequent concrete must be reduced to obviate the presence of free water.
1. MCON HARD FLOOR (NON-METALLIC) is applied in two stages. The first application is made using 50% to 70% of the total material. MCON HARD FLOOR (NON-METALLIC) is evenly broadcast onto the concrete surface. When the material becomes uniformly dark by the absorption of moisture from the concrete this first application can be floated. Wooden floats or, on large areas, the power trowel with disc may be used. Immediately after floating, the remaining MCON HARD FLOOR (NON-METALLIC) is sprinkled evenly over the surface. Again moisture is absorbed and the surface can be floated in the same way as before. Final finishing of the floor using a power trowel can be carried out when the floor has stiffened sufficiently so that damage will not be caused.
1. The time of the application is very important in order to derive full benefits of MCON HARD FLOOR (NON-METALLIC). If MCON HARD FLOOR (NONMETALLIC) is applied too early, it will absorb water, hard wearing aggregate may sink to the bottom. If application of MCON HARD FLOOR (NON-METALLIC) is delayed, no moisture from the concrete surface will be available to hydrate MCON HARD FLOOR (NON-METALLIC), resulting in poor pitted surface. As a guide, the application should be made between 1 Hours-1.5 Hour i.e. when surface water on concrete is completely evaporated. Never add water to ease trowelling.
1. 12 months in original packing if stored at room O temperature i.e.25 C
1. Wear hand gloves, safety shoes and safety goggles while using and handling the product.
2. In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately
1. Medium – 5 kg /m2
2. Regular- 3 kg /m2
3. Heavy – 7 kg /m2
1. 25 Kgs Bags
No Features & Benefits content added yet.
08976907887 
sales@mconrasayan.com 
