08976907887 
sales@mconrasayan.com 
1. Non – shrink
2. Good adhesion to concrete
3. Extreme abrasion resistance
4. Extreme durability
5. Faster setting time
6. Used in fast-track repairs
7. Perfect for heavy – duty environments
8. Excellent adhesion/inter-coat adhesion
MCON CRACK BOND EP provides excellent chemical resistance and mechanical strength. This system is commonly employed for crack filling of concrete structures. Various mineral fillers like chalk powder or silica floor can be added to get flow flowable consistency for crack filling on vertical surfaces. It is an ambient cure crack-filling system to repair concrete structures. MCON CRACK BOND EP is a two-part system with a resin-to-hardener ratio of 2:1.
1. Non – shrink
2. Good adhesion to concrete
3. Extreme abrasion resistance
4. Extreme durability
5. Faster setting time
6. Used in fast-track repairs
7. Perfect for heavy – duty environments
8. Excellent adhesion/inter-coat adhesion
1. Lobbies, Lounges, Nightclubs & Flyovers
2. Schools, Stadiums & Hallways
3. Concrete Slabs, Columns, Precast Concrete, Beams
4. Butcher Shops and Commercial Kitchens
1. MCON CRACK BOND EP is non-toxic, non-flammable and non-hazardous.
2. However, any splashes on any part of the human body must be washed with plenty of water.
1. All surface preparations must be carried out to standard. New concrete must be cured for a minimum of 28 days before a coating.
2. Concrete moisture test should be carried out prior to coating application as per Standard ASTM4263. The moisture content should be less than 4%.
3. Surface to be treated must be structurally sound and the substrate compressive strength should be at least 25MPa. All non-structural cracks, holes and surface deformities should be repaired.
4. In general, the surface to be treated MUST be clean and free of all traces of loose material, dirt, debris, mildew, oil, grease, old coatings, curing compounds, release agents, laitance, dust and other contaminants.
5. Mix Mcon CRACK BOND EP (Resin + Hardner) in 2:1 proportion.
6. Fill the mixed material in cracks till top of surface. Allow it to dry for 30 mins.
7. After drying if material shrink & settled in cracks, refill the material again till the top of surface.
MCON CRACK BOND EP provides excellent chemical resistance and mechanical strength. This system commonly employed for crack filling to concrete structure. Various mineral fillers like chalk powder or silica floor can be added to get non flow able consistency for crack filling on vertical surfaces. It is an ambient cure crack filling system to repair concrete structure. MCON CRACK BOND EP is a two-part system with a resin to hardener ratio of 2:1.
Coverage: Varies Depending On Depth & Width Of Crack
Packing: 3 Kgs Pack, HDPE Bucket
Features
Benefits
