1. Contains no VOC
2. Excellent bond on freshly prepared concrete surfaces can be applied to damp concrete without any loss of adhesion.
3. Excellent coating for internal / external lining of pipelines where abrasion / chemical resistance is of major concern. Cured film is very hard and abrasion resistant.
4. Ideal as a body coat in protective coating systems. Particularly suited to quick repair situations like maintenance work.
5. Excellent food grade properties.
1. Wear hand gloves, safety shoes and safety goggles while using and handling the product.
2. In case eyes or mouth are affected wash with plenty of clean water and seek medical treatment immediately.
12 months from the date of manufacturing when stored in un – opened, original sealed and dry condition at a temperature range from +5oC to 40oC
1. Concrete must be at least 28 days old. Any cement laitance must be removed.
2. Concrete surfaces must be clean, dry or matt damp, free from standing water, ice, dirt, oil, grease, laitance, surface treatments, all loose particles and any other surface contaminants that could affect adhesion of the adhesive.
3. Apply MCON 2K EPOXY PRIMER by brush /roller & let it dry for 12 hours before application of MCON EPOXY FG PAINT.
4. Stir container of each component thoroughly for uniformity.
5. For best result, use a variable speed drill mixer with a spiral type blade at the bottom of stirrer rod. The speed may be 400 – 600 rpm.
6. Mix only sufficient materials for immediate requirements. Leave the mixed material to stand for 2‐ 3 minutes to enable entrapped air, if any, to escape from the mix and then use as quickly as possible.
7. MCON EPOXY FG PAINT may be applied by a soft nylon brush or roller, airless spray machine.
8. If the concrete surface is very porous, more than two coats may be required to seal all surface pores otherwise air bubbles may appear on the next coat.
1. MCON EPOXY FG PAINT is used for potable water tanks as a coating / lining material. Tank linings,
2. Structural steel,Masonry and Concrete surfaces, Furniture, Chemical plants,
3. Oil refineries, Food processing industries, etc.
4. Sea water intake tunnels.
MCON EPOXY FG PAINT is high build and fast drying food grade epoxy coating. Excellent coating for internal/ external linings of potable water pipelines. Internal coating for concrete / steel potable water storage. MCON EPOXY FG PAINT provides long term protection to cement and concrete substrates.
Coverage: 5-6 m2/Kg/ per coat (100 microns per coat) (2 coats recommeded)
Packing: 24 kg kit (Pack-A: 20 kg, Pack-B 4 kg) metal containers
No Features & Benefits content added yet.
08976907887 
